76 Hitches See manufacturer’s catalog for more applications. Specifications are subject to change without notice. BALL MOUNTS (HUS) HITCH BALLS, BALL MOUNTS & SHANKS WEIGHT DISTRIBUTION AND HITCH SHANKS Solid steel, chrome finish hitch balls come in various shank lengths to accommodate a variety of ball platform thicknesses. Rated from Class I to Class IV with varying gross towing loads up to 14,000 lb. Includes lock washer and nut. Ball Mounts vary by weight rating, shaft length, and rise/drop measurements. Husky® offers a wide range of rise/drop choices. BALL MOUNTS PRE-TORQUED TOW KITS Class IV. Fits 2 Inch Receiver. 6,000 lb GTW. Non-swivel; non-extendable. 1 Inch ball shank diameter; with 2 inch ball; powder-coated black steel; includes pin and clip. (HUS) - 31366 2” Ball, 2” Drop, 3/4” Rise (HUS) - 31367 2” Ball, 3-1/4” Drop, 2” Rise TRI-BALL ADJUSTABLE BALL MOUNT Adjustable Triple Ball Mount. Chrome ball, zinc plated hardware, black powder coat finish. Head adjusts up and down on a reversible shank. Anti-rattle adjustment bolt on the head. Easy pull pin adjustment. • 1-7/8” Ball: 2,000 lb capacity. • 2” Ball: 6,000 lb capacity. • 2-5/16” Ball: 10,000 lb capacity. All hardware included. Weight rating is limited to vehicle tow rating; see vehicle owner’s manual. (HUS) - 30001 Tri-Ball Adjustable Ball Mount Includes a solid steel ball mount accessory, and accepts 1” shank diameter hitch ball (not included). Adjustable 6-3/4 Inch Drop or 5-1/4 Inch Rise. GTW: 6,000 lb. Two high strength clevis pins allow for easy removal and swift interchangeability of accessories and height adjustments. Rust resistant powder-coat finish. (HUS) - 33108 2” Receiver ADJUSTABLE BALL MOUNT KIT WITH BALL PLATFORM Slides into your hitch receiver and provides the attachment point for your weight distribution. Rise and drop usage in this chart is for round bar weight distribution. ADJUSTABLE BALL MOUNT KIT WITH DUAL BALL Quick, easy to adjust. Solid 2” shank platform fits 2” receivers. Works with pintle hook combo balls, clevis mounts and more. Includes a solid steel, 2-5/16” ball (14,000 lb GTW) and a 2” ball (10,000 lb GTW). (HUS) - 33104 2” Receiver, 6” Drop (HUS) - 33255 2” Receiver, 10” Drop (HUS) - 33254 2-1/2” Receiver, 6” Drop Includes a solid forged steel pintle combo with ball, and 2 clevis pins for easy removal and swift interchangeability of accessories and height adjustments. Rust-resistant powder-coat finish. (HUS) - 33109 2” Receiver, 2” Ball 10,000 lb GTW (HUS) - 33110 2” Receiver, 2-5/16” Ball 13,000 lb GTW PINTLE COMBO Solid forged steel pintle combo with ball. Easy removal and swift interchangeability of accessories and height adjustments. Rust-resistant powder-coat finish. Mount sold separately. (HUS) - 33114 2-5/16” Ball 13,000 lb/6.5 Ton (HUS) - 33258 2-5/16” Ball 20,000 lb/10 Ton The Switch Hitch offers three ball sizes: 1-7/8”, 2”, and 2-5/16”. Quickly switch from one ball to another through a patented switching and locking mechanism. (HUS) - 33140 Switch Hitch SOLID STEEL HITCH BALLS SWITCH HITCH NOTE: Weight carrying capacity of shanks listed above is 6,000 lb maximum and weight distribution 14,000 lb maximum. ADJUSTABLE BALL MOUNT/ PINTLE COMBO KIT REPLACEMENT PINS FOR ADJUSTABLE BALL MOUNT KITS (HUS) - 33111 Replacement Pins for 33104/ 33108/33109/33110/33254/33255 Ball Mounts LOCKING PIN SET FOR ADJUSTABLE BALL MOUNT KITS (HUS) - 33112 Locking Pin Set for 33104/33108/ 33109/33110/33254/33255 Ball Mounts Part# Shank Diameter Shank Length Max GTW Pkg 1-7/8" BALL DIAMETER (HUS) - 33844 3/4” 1-3/4” 2,000 lb Bulk (HUS) - 33846 1” 2-1/8” 2,000 lb Bulk 2" BALL DIAMETER (HUS) - 33849 3/4” 1-3/4” 3,500 lb Bulk (HUS) - 33850 3/4” 2-5/16” 3,500 lb Bulk (HUS) - 34917 3/4” 1-3/4” 3,500 lb Pkg (HUS) - 30601* 1” 2” 5,000 lb Bulk (HUS) - 33851 1” 2-1/8” 6,000 lb Bulk (HUS) - 33852 1” 2-7/8” 6,000 lb Bulk (HUS) - 32913 1” 2-1/8” 7,500 lb Bulk (HUS) - 32914 1” 2-7/8” 7,500 lb Bulk (HUS) - 34918 1” 2-1/8” 6,000 lb Pkg (HUS) - 34924 1” 2-7/8” 6,000 lb Pkg (HUS) - 33853 1-1/4” 2-5/8” 8,000 lb Bulk 2-5/16" BALL DIAMETER (HUS) - 33855 1” 2-1/8” 6,000 lb Bulk (HUS) - 34919 1” 2-1/8” 6,000 lb Pkg (HUS) - 30255 1-1/4” 2-5/8” 12,000 lb Pkg (HUS) - 39386 1-1/4” 2-5/8” 12,000 lb Bulk (HUS) - 30678 1-1/4” 2-5/8” 14,000 lb Bulk *Lift Height 1” Part# Length Type Rise Drop (HUS) - 31518 10” 2”x2” 6-1/4” 1-3/4” (HUS) - 30857 10” 2”x2” 9-1/2” 5” (HUS) - 30859 12” 2”x2” N/A 8-3/4” (HUS) - 30856 14” 2”x2” 6-1/4” 1-3/4” (HUS) - 30858 14” 2”x2” 9-1/2” 5” (HUS) - 32459 10” 2-1/2”x2” 6-1/4” 2-1/4” (HUS) - 32554 10” 2-1/2”x2” 9-1/2” 5-1/2” (HUS) - 32550 12” 2-1/2”x2” N/A 9-1/4” (HUS) - 32553 14” 2-1/2”x2” 6-1/4” 2-1/4” (HUS) - 32555 14” 2-1/2”x2” 9-1/2” 5-1/2” Part# Length Rise Drop Weight (HUS) - 31357 8” 3/4” 2” 6,000 lb (HUS) - 31364 8” 3/4” 2” 6,000 lb (HUS) - 31360 9” 1” 2-1/4” 6,000 lb (HUS) - 31362 10-1/2” 1” 2-1/4” 6,000 lb (HUS) - 31369 12” 1” 2-1/4” 6,000 lb (HUS) - 31359 6-3/4” 2” 3-1/4” 6,000 lb (HUS) - 31358 10” 3” 4-1/4” 5,000 lb (HUS) - 31363 11-1/2” 4-3/4” 6” 5,000 lb (HUS) - 31361* 9” 0” 8” 3,500 lb Class V, 2.5" (HUS) - 33004 9-1/2” 1” 2-1/2” 12,000 lb (HUS) - 33005 9-1/2” 3-1/4” 4-3/4” 12,000 lb *Not to be used in the rise position. RUGGED IS STANDARD EQUIPMENT.™ (HUS)
RkJQdWJsaXNoZXIy MTAyMzU3Ng==