LINK-Towing-Catalog-2021

See Manufacturer’s Catalog For More Applications. Specifications are subject to change without notice. [ 5 ] (C2X) Suspension Systems Tires & Wheels Hitches Jacks, Couplers & Locks Electrical & Lighting Body Components & Flooring Chemicals & Coatings Brake Controls & Actuators Axles & Components Brake Assemblies Index Towing Cargo Control & Hardware Quick-Connect Ordering — It’s as easy as 1-2-3-4! Straight Axle Measurements: Step 1: Select your axle • Determine the weight capacity and the lubrication you need • Determine the hub-face to hub-face measurement you need (See diagram below) Super Lube ® Hubs and Bearing System Advantages Step 2: Select your hub assembly • Determine the bolt pattern needed Step 3: Select your brake assembly (when using Idler Hubs, skip this step) • Choose from three popular sizes: 10” x 2.25”, 12” x 2”, or 12.25” x 3.375” • Choose your left and right brake assemblies and your corresponding install kit Step 4: Select your mounting hardware (For Hanger Kits and Leaf Springs, see page 11) Spring Seats: Order Spring Seats to match your axle diameter: 1.75”, 2.375” or 3”. U-Bolts: Order U-bolts to match measurements per the diagram at right. End the hassle of lubricating hubs and bearings! Our Super-Lube ® system makes changing grease easy and clean. Lubrication requires no disassembly of wheels or hubs and offers better protection over standard systems. Grease fills the entire bearing cavity, allowing complete submersion. Note: When measuring a 5-bolt circle, measure the diameter of the circle as shown above in red or from the center of the hole to the center of a bolt (green arrow) and double that length. When measuring for even numbered bolt circles, measure the distance from the center of the bolts/holes that are directly opposing one another and the furthest apart as indicated above. A B C Hub-Face to Hub-Face STRAIGHT AXLE