HEAVY-DUTY POWER MODULE Rated for up to 4.2A for turn/stop circuits and 7.5A for the taillight circuit. Integrated resettable short circuit and overload protection from shorts and installation wiring mishaps. Works with LED or incandescent bulbs giving trailer lights full brightness. Designed not to send feedback thru the vehicle circuits. Interprets/decodes multiplex signal inputs. 1 year warranty. 17-0319 119190 Integrated Circuit Overload Protection 17-0316 119191 w/ Installation Kit ULTRA PROTECTOR Integrated, resettable short circuit and overload protection against harmful electrical shorts and miswires. Inhibits feedback through the vehicle’s circuits. Works with 2 or 3-wire light systems and LED or incandescent bulbs. Uses 16A for the taillight circuit and 4.2A for turn/stop circuits. Decodes multiplex signal inputs. 1 year warranty. 17-0400 119192 Ultra Protector TRAILER LIGHT POWER MODULE Rated for up to 4.2 amps for turn/stop circuits and 7.5 amps for the taillight circuit. Works with either LED/ incandescent bulbs. Will override the hazard lamps when the brake is activated. Can be used on a 2-wire or 3-wire system. 17-0315 119147 Trailer Light Protector Converts 3-wire to 2-wire with integrated 4-way flat connector and 60” of wire. Improved circuit board features greater load capacity. Protects against incorrect wiring and voltage drop. 1 year warranty. 17-0283 119178 Int. Circuit Protector 17-0396 119130 18” Blunt Lead, 60” on 4 Flat TAILLIGHT CONVERTERS 3 to 2 Taillight Converter from Pollak converts from 3-wire to 2-wire. Includes 12” leads on both sides. 69-9525 12-752 Taillight Converter TAILLIGHT CONVERTERS HEAVY-DUTY 3-2 SOLID STATE TAILLIGHT CONVERTER Universal converter application, 4-wire flat connection on molded unit. 60” long. Adhesive mount. 95-3296 12-751EV Standard 95-3295 12-750EV Heavy-Duty Does not tap into existing vehicle wiring. Fits most vehicles with clearance in taillight. Operated by the towing vehicle. 14-5264 BX8869 Wiring Kit, each 14-5230 BX88184 Bulb/Sockets, 10/pack Uses a system of diodes to wire the towed vehicle’s brake lights, taillights and running lights for towing. 17-0361 154 Deluxe Kit 17-0089 152 Economy Kit BULB & SOCKET WIRING KIT UNIVERSAL WIRING KIT Replacement diode block for wiring kits. Molded and sealed to keep moisture out. 14-5706 BX8863 9 Terminals, 4 Amp 14-5226 BX88159 Diode, 6A, 12 Pack HY-POWER™ DIODES DIODE BLOCKS Use to tie into the towed vehicle’s brake light, running light and turn signal wiring, and connect it to your motorhome. Diodes permit electrical current to flow in only one direction. 17-0371 790 One Hy-Power Diode 17-0370 792 Two Hy-Power Diodes 17-0372 793 Three Hy-Power Diodes 17-0373 794 Four Hy-Power Diodes 17-0374 790-25 25 Hy-Power Diodes (Bulk) Connects towed vehicle light system to the RV’s wiring. Includes diodes to prevent electrical feedback. 14-5543 BX8811 Taillight Diode Kit 14-5705 BX8848 4 Diode Wiring Kit Eliminates the need to remove a fuse for towing, then having to reinsert it for driving. After installing, you flip a switch to accomplish the same task. 14-0503 76511 20A, Long 14-0507 76512 Double, 20A, Long 14-0511 76514 Double, ATO/ATC, 20A, Long TAILLIGHT DIODE KIT FUSEMASTER HARNESSES TRAILER WIRING Taillight Converters, Wiring Kits 23-15 2023
RkJQdWJsaXNoZXIy NDUzNzYy