2½-INCH TO 2-INCH HIGH-LOW ADAPTERS It’s both an adapter and a drop hitch! These adapters attach to 2½-inch receivers and accept a 2-inch insert. Great for tow bars, bike carriers, cargo trays and any other hitch-mounted accessory. 10,000-lb. capacity; 400-lb. maximum tongue weight; fit nearly all 2½” receiver hitches. size weight capacity 14-1622 058-4 4” 10,000 lbs 14-1617 058-6 6” 10,000 lbs DUAL HITCH RECEIVER With this dual-purpose hitch receiver, you can add a bike carrier or other hitch accessory to the rear of your motorhome. Solidsteel construction; 10,000-lb. capacity; 400-lb. maximum tongue weight. 14-5985 077-2 2"/2" Dual Hitch Receiver Both receivers offset by 2" 14-5986 077-4 2"/4" Dual Hitch Receiver One receiver offset by 2"; the other by 4" 93-8068 077-6 2"/6" Dual Hitch Receiver One receiver offset by 2"; the other by 6" 14-1620 077-8 2"/8" Dual Hitch Receiver One receiver offset by 2"; the other by 8" 14-1618 077-10 2"/10" Dual Hitch Receiver One receiver offset by 2"; the other by 10" FOR 2-INCH RECEIVER HITCHES The 07 series High-Low Hitches have a 6,000-lb. GVWR and a maximum tongue weight of 200 pounds. The 048 series hitches have a solid steel shank, allowing a 10,000-lb. capacity and 400-lb. tongue weight. Fit nearly all two-inch receiver hitches. Available in 2”, 4”, 6” and 10” sizes. size weight capacity 14-0999 048-2 2" 0,000 lbs 14-6024 072 2" 6,000 lbs 14-0998 048-4 4" 10,000 lbs 14-6014 070 4" 6,000 lbs 14-6361 048-6 6" 10,000 lbs 14-6028 076 6" 6,000 lbs 14-6363 048-8 8" 10,000 lbs 14-6365 048-10 10" 10,000 lbs HITCH RECEIVER EXTENSIONS The hitch receiver extensions provide 7½ and 12 inches, for those towing systems which need a little more reach. Rated at 6,000-lbs GVWR and 200-lbs max tongue weight. 14-6026 071-75 7½" Hitch Receiver Extension 14-6019 071 12" Hitch Receiver Extension Shown: 048-8 Also available in 2", 4", 6" and 10" sizes. Shown: 077-4 ANTI-RATTLE HITCH RECEIVER EXTENSION This 7½" hitch extension has a solid steel shank, allowing a 10,000-lb. capacity and a 400-lb. tongue weight. A threaded hitch pin hole and bolt eliminate the rattle, wander and sway associated with other hitch extensions. HITCH ACCESSORIES Quiet Hitch eliminates any free play between the receiver and tow bar (or whatever you insert) for a solid, seamless connection. Consistent pressure keeps towing combination tracking straight, which reduces tire 14-6027 061 For 2" hitch receivers 14-6006 062 For 2½" hitch receivers 10-0532 061-125 For 1¼" hitch receivers QUIET HITCH STOP SWAY & WANDER BEFORE IT BEGINS! Note: Receiver must have ring/ collar for Quiet Hitch to attach. 2½" Shown: 058-4 Also available in 4", 8" and 10" sizes. 2" wear and tear on the hitch and receiver. Especially effective on towing combinations w/multiple hitch extensions; also reduces noisy rattle caused by hitch accessories. QUICK FOOT JACK EXTENSION 71-9988 725014 Quick Foot jack extension If your tongue jack takes forever to raise and lower, you need Quick Foot. Just drop it and pin it to gain up to six inches of trailer tongue height in ten seconds or less! Fits virtually all standard tongue jacks (both manual and electric) with twoinch diameter inner tubes. 5,000-lb. tongue weight rating. Quick Foot saves time! 14-1469 071-1075 7½" Hitch receiver ext. ....... Time Tested • Time Proven ® TOWING Towing Accessories 22-18 2023
RkJQdWJsaXNoZXIy NDUzNzYy