ELECTRICAL Battery Switches, Fuse Blocks ST Blade Common source fuse blocks (Screw Terminal) Consolidates branch circuits and in-line fuses. One-piece stainless flange nuts ensure secure connections. Clear insulating cover with small format label recesses and storage for two fuses. Tin-plated copper buses and fuse clips. Accepts ATO®/ATC® fuses. Fuses sold separately. Maximum30A per circuit; 100A per block. For 12V or 24VDC systems. 04-6911 5025-BSS 6 Circuits 03-3515 BSS5026 12 Circuits ST Blade Split Bus Fuse Block (Screw Terminal) Two isolated 6-circuit fuse blocks with a negative bus. For use when a mix of switched and 24-hour circuits are in the same block. Accepts ATO®/ATC® fuses. Common and/or independent source fuse block. Clear insulating cover with small format label recesses and storage for two fuses. Accepts ring terminals. Tin-plated copper buses and fuse clips. Fuses sold separately. Maximum 30A per circuit; 100A total (not to exceed 80A per load group). For 12V or 24V DC systems. 03-3525 BSS5032 12 Circuits ST Glass Fuse Block (Screw Terminal) Integrated fuse ejection system. Clear insulating cover accepts Blue Sea Systems Large Format Labels and provides storage for spare fuses. Accepts all 3AG glass fuses. Maximum 30A per circuit; 100A per block. For 12V or 24V DC systems. 07-4287 BSS5015 32V DC Max. BelowDeck Circuit Breaker Panels Carling Technologies™ 15A circuit breakers have red “On” indicating LEDs for safe operation in low light conditions. Polycarbonate/ABS panel surface is UV-stabilized, flame retardant and will not corrode. 07-1754 BSS4350 4 Position 07-4650 BSS4351 4 Position, 2-12V Sockets 69-0575 BSS4352 6 Position ST Blade Compact Fuse Blocks Common source Provides surface mount circuit protection for ATO®/ATC® Fuses in a compact footprint. The single side design allows wire entry from one side to maximize space. 03-3527 BSS5045 4 Circuits 03-3528 BSS5046 8 Circuits Easily add 4 fused circuits to the terminal of a battery. Provides power to new accessories in your RV or boat. • Mounts on the battery terminal stud • Screw terminals for securing wires • Nylon insulated ring terminals included for each screw terminal • Includes four 16–14 AWG and four 12–10 AWG Nylon insulated ring terminals 07-5960 BSS5023 Fuse Block 03-3503 BSS5024 Kit w/ Busbar ST Blade battery terminal mount fuse block and kit Innovative Electrical Systems Built to Last PowerPost Plus Cable Connector Enables the connection of multiple smaller wires in spaces where a traditional bus bar may not fit. 150A maximum. For 12V or 24V DC systems. 48V DC max. 07-5624 BSS2103 3/8"-16×3/4" BatteryLink® ACR Automatic Charging Relay Senses voltage on either battery bank, and integrated LED indicates ACR status. Suitable for alternators up to 120A. For 12V or 24V DC systems. 03-3578 BSS7611 120A PowerPost Cable Connector Insulated single stainless steel stud terminates multiple large conductors. Includes insulator. Amperage rating is determined by wire and terminals used. For 12V or 24V DC systems. 48V DC max. 03-3460 BSS2002 5/16”-18×7/8” 11-55 2023
RkJQdWJsaXNoZXIy NDUzNzYy