Your Local, Nationwide Distributor 82 Vacuum cups are the best way for attaching items to a rigid, non-porous surface without drilling any holes. Slotted holes in the top plus a threaded (1/4-20) stainless insert enable you to bolt or mount items with ease. All metal parts are high grade stainless steel, even the springs inside our pump, for extra durability in the elements. Protective cap included. 4.5" has pull rating of 120 lbs. and 6" has rating of 210 lbs. Action Camera Mount features a sturdy aluminum tripod adapter on top of a 4.5" suction mount. Attach it to the car, the boat or wherever you want to capture the action! Mount the Heavy Duty Rod Holder on your console, bait well, or transom. Includes two 4.5" SeaSuckers. Removable pin in the bottom of the precision-machined PVC rod tube to accommodate long-butt spinning rods or leave it in to handle conventional rods. Approximately 5"x 11" footprint. Part No. MF5033 Part No. MD5531 Part No. MB5404W Part No. MB5420 Part No. MF5107W Part No. MB5719 Part No. MF5061 Part No. MC5307 Put a bag over the hoop, snap on the bag clips, and clean up that boat! Open: 12" x 7", extends 11" from the surface when mounted. Four bag clips hold 13 gal. bags and larger. Includes two 4.5" SeaSuckers. Heavy-duty, black-rubber strap mounted on a powerful, easy-to-use 6" SeaSucker. Multi-step strapping to hold fire extinguishers to an 80-sized dive tank. If you want more rod, gaff, or boat hook storage along your gunwales, this is the product for you. Instead of holding your rods straight up and down like all of our other rod holders, these hold horizontally. The 4.5" SeaSuckers mounts them securely on your side walls, gunwales or even on the inside of your SUV for getting gear to the boat. A rubber insert holds multiple rods criss-crossed between the units, topped off with a solid velcro-backed strap to keep everything in place. Sold in pairs. Great for holding dock lines or a life ring. Made of strong UV-stable high-density polyethylene (Starboard), the 1.25" wide hook has an opening spread of approximately 3.5". Comes pre-attached to a powerful 4.5" SeaSucker. Gives you more of what you need when you’re filling your cooler with fish. There’s room for knives, pliers, Boga Grips, de-hookers, snips, sharpening steels, lures, hooks, and more! White HDPE for the ultimate in durability. Powerful 4.5" vacuum mount attaches to your bait well, your transom, your center console, or wherever it’s convenient for you. Our custom made handles with two 4.5" mounts can be used as an extra hand-hold or grab bar,or as a carrying handle. Made of 3/4" white Starboard and has plenty of room to grab onto. Vacuum mounts have built-in finger pumps to attach or remove this handle in seconds. Use on glass, fiberglass, metal, and most plastics. Medium duty features two 4.5" SeaSuckers (pull rating at over 200 lbs.). Heavy duty unit features two 6" SeaSuckers (rating of over 400 lbs.). Attach holder in the head, on the bait well, on the center console or where ever you wan to keep a roll of paper towels handy. Comes ready to mount with a powerful 4.5" SeaSucker pre-attached. Powerful 4.5" vacuum mount holds a can or bottle on a vertical surface like the side of your console or bait tank. Insert removes for easy cleaning. Horizantal mount unit includes an adapter to attach the SeaSucker on the bottom so you can mount it on a horizontal surface like a console or table top. Doubles as a mini tackle-rigging station with the ability to hold a pair of pliers, a knife, a couple dozen hooks and lures, and whatever else you can fit into the 2.75" cup in the middle. 4.5" vacuum mount, mounts where you need it. Inserts remove for easy cleaning. Features a sturdy HDPE base. Removable pins at the bottom so you can take it out (and store it in the slot on the base) for long-butt spinning reels, and leave it in for gimballed conventional rods. Great for attaching to a bait tank while rigging lines, or to the gunwale in the front of the boat where you don’t have built-in rod holders. Includes a 6" suction mount. For storage and transportation only. Part No. VM1007B Part No. VM1013W Vertical Mount Horizontal Mount Vacuum Mounts Camera Mount Heavy Duty Rod Holder Waste Band - Large Single Tank Strap Horizontal Rod Holder Utility Hook Pro Series Tool Holder Grab Bar Handles Paper Towel Holder Cup Holders Fisherman’s Cup Holder Pro Series Rod Holders Part No. Description VM1001B 4.5" Black VM1001W 4.5" White VM1002B 6" Black VM1002W 6" White VM1007B 4.5" w/Low Profile, Black VM1013W 4.5" w/SS D-Ring, White Part No. Description EL5999 Action Camera Mount Part No. Description MC5314W 1 Cup Holder Vertical MC5301W 2-Cup Holder Vertical MC5300W 2-Cup Holder Horizontal Part No. Description MB5281 Heavy Duty Handle MB5280 Medium Duty Handle Part No. Description MF5082 2-Rod Holder, 6" Mount MF5083 3-Rod Holder, 6" Mount MF5081W 1-Rod Holder, 4.5" Mount (SSK) GALLEY & INTERIOR • Fishing
RkJQdWJsaXNoZXIy MTAyMzU3Ng==