Your Local, Nationwide Distributor 396 TRAILER & TOWING • Brackets 10601G40 10600G40 10604G40 10603G40 26244GA 26265GA Light Duty Vertical Bunk Brackets Perfect for small craft trailers, a single bracket will allow the bunkboard to pivot with the hull as the boat is loaded. Two brackets can also be used together to hold the bunkboard in a xed position. Made from 11 ga galvanized steel with top bolt holes measuring 7/16”. 1BSU /P Description ( Lanced, Length 9-1/2”, Slot 7/16” x 6” ( Smooth, Length 12-5/8”, Slot 1/2” x 9-1/8” ( Dimpled, Length 7-1/2”, Slot 7/16” x 4-3/8” ( Lanced, Length 8-1/2”, Slot 7/16” x 2-1/2” 90° Heavy Duty Vertical Bunk Brackets 5” Wide and 1/4” thick galvanized steel, these heavy duty bunk brackets are strong enough to mount large bunkboards to carry larger boats. Sold individually. 1BSU /P Description (" Height 6” (" Height 8” (" Height 10” 85° & 95° Heavy Duty Vertical Bunk Brackets Similar to the 90° brackets except the bottom mounting flanges are angled. Use when an angle is needed due to V shaped cross members. Use in pairs of one 85° and one 95° brackets so bolt holes will be in alignment. Hot dip galvanized, 5” wide and 1/4” thick. Sold individually. 1BSU /P Description (" Height 6”, Base Angles 85° (" Height 6”, Base Angles 95° Pontoon Bolster Brackets Pontoon bolster brackets support bunkboards in a shallow V cradle con guration that best suits pontoon hulls. Best when installed with 2x6, 2x8, or 2x10 carpeted bunkboards laid at. A bracket should be installed at each frame cross member for maximum support and load capacity. 1BSU /P Description (" 11 ga. Galvanized Steel (" 11 ga. Galvanized Steel ($ &)
RkJQdWJsaXNoZXIy MTAyMzU3Ng==