Shop 24/7 at www.seawide.com 291 Marine Exhaust/Water Hose — No Wire • MOTOR & DRIVE UNIT Hoses are fabric reinforced and have an EPDM tube and cover. They are primarily used for engine heater hose, heat exchanger, A/C circulation, and drain lines. Resistant to mild chemicals, heat, cold, ozone, and saltwater. The temperature ranges from -40°F - +212°F’. Choose series 1300 for regular duty or 1350 for heavy duty hoses. Hoses are reinforced with 2 plies of synthetic cord and made of black, heavy-walled synthetic rubber. Used for straight connections in wet exhaust systems and engine water circulation lines. Resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, and saltwater. These hoses also have double the ozone resistance required by SAEJ2006. The temperature ranges from -20°F - +200°F continuous, +250°F intermitent. Meets SAEJ2006 Type R1 standards. Series 1600 Hoses have a good bend radius, are fabric reinforced and have an EPDM tube and cover. These hoses are primarily used for critical water connections, heat exchanger, and toilet intake. They can also used for small engine intake, bilge pump intake/discharge, and below water line drains and scuppers. They are resistant to mild chemicals, heat, cold, ozone, and saltwater. The temperature ranges from -40°F - +190°F. Hoses have a black synthetic black tube and cove and are reinforced with double wire helix embedded between plies of synthetic cord so it’s abrasion resistant. They are resistant to exhaust fumes, ozone, mild chemicals, antifreeze, and saltwater. Primarily used for wet exhaust connections with signi cant bends, engine intake and scupper lines. The temperature ranges from -20°F to +200°F continuous, +250°F intermittent.The hose now has double the ozone resistance. Bend radius = 4 x I.D. 1300-1350 Series Water Heater Hoses Shieldsfle[ II 0arine Water E[haust +oses ³ No Wire 1600 Series Water Heater Hoses Shieldsaust-& +oses Part No. Series Length I.D. In & mm O.D. In & mm Working Pressure 16-130-0586 1300 50'L R/O Ctn 5/8" - 15.9 7/8" - 22.3 62 PSI 16-130-0346 1300 50'L R/O Ctn 3/4" - 19.1 1" - 25.48 50 PSI 16-135-0580B 1350 450' Reel 5/8" - 15.9 31/32" - 24.59 200 PSI 16-135-0586B 1350 50'L R/O Ctn 5/8" - 15.9 31/32" - 24.59 200 PSI 16-135-0346B 1350 50'L R/O Ctn 3/4" - 19.1 1-1/64" - 28.4 200 PSI Part No. 50'L Coil Part No. 12-1/2' L Part No. 6-1/4'L Part No. 24"L Part No. 48"L I.D. In & mm O.D. In Ply 16-200-0580 — — — — 5/8" - 16 1-1/32" 2 16-200-0340 16-200-0344 — — — 3/4" - 19 1-9/34" 2 16-200-1000 16-200-1004 — — — 1" - 25 1-3/8" 2 16-200-1140 16-200-1144 — — — 1-1/4" - 32 1-45/64" 2 16-200-1120 16-200-1124 — — — 1-1/2" - 38 1-15/16" 2 16-200-1340 — — — — 1-3/4" - 45 2-13/64" 2 16-200-1780 — — — — 1-7/8" - 48 2-23/64" 2 16-200-2000 16-200-2004 — — — 2" - 51 2-31/64" 2 16-200-2140 — — — — 2-1/4" - 58 2-3/4" 2 16-200-2380 — — — — 2-3/8" - 60 2-7/8" 2 16-200-3000 16-200-3004 16-200-3001 16-200-3000-24 — 3" - 76 3-9/16" 2 — — 16-200-3121 16-200-3120-24 — 3-1/2” - 90 4-3/32" 2 — 16-200-4004 16-200-4001 16-200-4000-24 16-200-4000-48 4" - 102 4-17/32" 4 Part No. 50'L Coil Part No. 12-1/2' L Part No. 6-1/4'L I.D. In & mm O.D. In Ply 16-252-1000 16-252-1004 — 1" - 25 1-11/32" 2 16-252-1140 16-252-1144 — 1-1/4" - 32 1-39/64" 2 16-252-1120 16-252-1124 — 1-1/2" - 38 1-15/16" 2 16-252-1340 16-252-1344 — 1-3/4" - 45 2-7/32" 2 16-252-2000 16-252-2004 16-252-2001 2" - 51 2-7/16" 2 16-252-2380 — — 2-3/8" - 60 2-51/64" 2 16-252-2120 16-252-2124 — 2-1/2" - 63 2-59/64" 2 16-252-3000 16-252-3004 16-252-3001 3" - 76 3-7/16" 2 16-252-3120 — — 3-1/2" - 90 4-1/16" 2 16-252-4000 16-252-4004 — 4" - 102 4-9/16" 2 16-252-6000 — — 6" - 152 6-9/16" 2 Part No. 400' Reel Part No. 50'L R/O Ctn. I.D. In & mm O.D. In & mm Working Pressure 16-160-0580B 16-160-0586B 5/8" - 15.9 1" - 25.4 300 PSI (S5M)
RkJQdWJsaXNoZXIy MTAyMzU3Ng==