Your Local, Nationwide Distributor 290 (D35) MOTOR & DRIVE UNIT • Hoses/Fuel System Hoses have a plastic barrier veneer with an NBR outer layer tube to prevent permeation. Reinforced hose complies with EPA & CARB very low permeation requirements and is weather/UV resistant. Primarily used for fuel feed (gasoline up to 85% ethanol blended fuels/diesel/all bio-diesel blends). Meets USCG Type A1-15 requirements for pleasure boats. Meets SAEJ1527 Type A1-15, ISO 7840 Type A1, and NMMA/CE type accepted standards. Temperature Range: -20°F to 212°F. Com ex is a versatile wire reinforced hose specially designed for inspected vessels. It is rated for fuel, vital water and non-vital water systems on boats requiring SAEJ1942 hoses. Applications include bilge, coolant, oil and fuel systems using gasoline, gasohol, diesel. Applications also include bio diesel, wet exhaust systems, non-potable water systems. Can also be used for engine intake, toilet and holding tank connections. This black nitrile hose is reinforced by 2 textile plies with a dual wire helix. The cover is black chlorprene. Temp. Range: -20°F to +212°F. Speci cations: SAEJ1942 Code F, VW, NVW; SAEJ1527 A1; SAEJ2006 R2; SAE20R2B, SAEJ20R4B, SAE20R5B, SAE30R5, ISO7840A1. Specially designed NBR tube with an embedded plastic barrier layer to prevent permeation. Design provides easy coupling insertion and the NBR/PVC cover is weather and UV resistant. Polyester reinforced and re-resistant. Primarily used for fuel feed (gasoline up to 85% ethanol blended fuels/diesel/bio-diesel all blends). Temperature Range: -20°F to 212°F’. Complies with EPA and CARB very low permeation requirements. Meets USCG Type A1-15 requirements for pleasure boats. SAEJ1527 Type A1-15’, ‘ISO 7840 Type A1, and NMMA/CE Type accepted standards. 2 year emission performance warranty. For use on all types of carbureated gasoline engines. Made with a neoprene cover and nitrile tube for use with leaded or unleaded gasoline and diesel fuels. Reinforced with a single ply of braided cord, 25’L. Limited 90-day warranty. Vent hoses resist gasoline/alcohol blended fuel and are re resistant. Features a weather/UV resistant NBR/PVC cover. Primarily used for fuel vent lines (gasoline up to 85% ethanol blended fuels/diesel fuels). Meets USCG Type A2 requirements for pleasure boats. Meets SAEJ1527 Type A2, ISO 7840 Type A2 and NMMA/CE Type accepted standards. The temperature ranges from -20°F to 160°F. Low Permeation Marine Fuel Hoses &omfle[ All-In-One +oses For Inspected Vessels Fire-Acol LoZ Permeation Fuel +ose Universal Fuel Line Fire-Acol Fuel 9ents Part No. 250' Reel Part No. 50'L R/O Ctn. Part No. 25' R/O Ctn. Part No. 10' Polypac I.D. In & mm O.D. In & mm 16-368-0140 16-368-0146 16-368-0145 — 1/4" - 6.4 35-64" - 13.72 16-368-0560 16-368-0566 16-368-0565 — 5/16" - 709 5/8" - 15.49 16-368-0380 16-368-0386 16-368-0385 16-368-0383 3/8" - 9.5 11/18" - 17.27 16-368-0120 16-368-0126 — — 1/2" - 12.7 13/16" - 20.83 Part No. 50'L Coil I.D. In & mm O.D. In Ply Bend Radius 16-321-1000 1" - 25.4 1.41" 2 2 16-321-1180 1-1/8" - 28.6 1.56 2 3 16-321-1140 1-1/4" - 31.8 1.66" 2 3 16-321-1120 1-1/2" - 38.1 1.91" 2 3 16-321-2000 2" - 50.8 2.48" 2 5 Part No. Description 16-365-0380 3/8" I.D., 49/64" O.D., Max. WP 100 Part No. Description 80051 1/4 inch O.S,; 1/8 inch I.D. 80054 3/16 inch O.S. 80057 1/2 inch O.S,; 1/4 inch I.D. 80060 1/4 inch O.S.; 5/16 inch I.D. 80063 5/8 inch O.S.; 3/8 inch I.D. Part No. Length I.D. In & mm O.D. In & mm 16-369-0580 250' Reel 5/8" - 15.9 31/32" - 24.6 16-369-0586 50' L R.O Ctn. 16-369-0585 25'L R/O Ctn. 16-369-0583 10' Polypac (S5M)
RkJQdWJsaXNoZXIy MTAyMzU3Ng==