Shop 24/7 at www.seawide.com 285 Kink resistant and exible, these hoses have an EPDM tube and cover, wire reinforced and two fabric plies. Resistant to toilet chemicals, odor permeation, ozone, saltwater, and heat. Used for toilet to holding tank, holding tank pump out, and offers maximum resistance to odor permeation. Bend radius is 5 x I.D. Hoses have a smooth white FDA grade PVC with vinyl helix. They are rated for full vacuum and are resistant to mild chemicals, permeation, and saltwater. Primarily used for bilge pump intake and discharge, drains (sinks, shower, and scupper). They are also used for livewell intake and drain, potable water tank ll, and sanitation. Resistant to odor permeation. Do not use ethylene glycol based antifreeze in hose. Do not use in pressurized water systems. Hose is smooth off-white PVC with a vinyl helix. Contains an anti-fungus/bacterial agent to inhibit odor causing growth. Resistant to mild chemicals, saltwater, and permeation. Primarily used for toilet to holding tank (self-draining lines) and holding tank pump out. Bend radius of 5” and Vac rating of 28. Do not use ethylene glycol based antifreeze in hose. CAUTION - Do not use for potable water. These industrial grade hoses have a smooth cover and clear FDA formula PVC with a white vinyl helix. They are rated for full vacuum and are resistant to mild chemicals and saltwater. Primarily used to bilge pump intake and discharge, potable water tank ll, drains (sinks, shower, and scupper), livewell intake and drain, and sanitation. (intake, vent and pump out) This hose is utilized for below the waterline connections. Do not use ethylene glycol based antifreeze in hose. Do not use in pressurized water systems. Built to last, these hoses have a lifetime warranty against odor permeation. Combines the exibility of a rubber hose with the permeation resistance of polyurethane. Easily slips over most ttings and the polyurethane cover is extremely abrasion resistant. Glossy polyurethane cover for easy clean up. Primarily used for head to holding tank and holding tank pump out. The tube is made of smooth, white NBR and is chemical and detergent resistant. Heat, weather, ozone, and abrasion resistant. Bend radius is 5 x I.D. Hoses have a 2-ply, black synthetic rubber tube and cover and are reinforced with wire helix embedded between piles of HD synthetic cord. They are resistant to exhaust fumes, ozone, mild chemicals, anti-freeze and saltwater. Hoses are abrasion and odor permeation resistant and have double the ozone resistance required by the SAEJ2006. Primarily used for engine intake, bilge pump intake/discharge and scupper lines. This hose is also used for wet exhaust connections (use where bends or long lengths are required). May also be used for toilet intake/discharge, and holding tank vent/pump out. The temperature ranges from -20°F - +200°F continuous, +250°F intermittent. The hose meets SAEJ2006 Type R2 standards. Sanitation Hoses VAC Extra Heavy Duty FDA Hoses Poly X Sanitation Hoses Shieldsfle[ II 0arine Water E[haust +oses ³ With Wire Super PVC Sanitation Hoses 9ac Industrial *rade +oses Part No. Description 16-101-1000 1" I.D., 50' Coil, Working Pressure 70 PSI 16-101-1120 1-1/2" I.D., 50' Coil, Working Pressure 50 PSI 16-101-1124 1-1/2" I.D., 12-1/2'L, Working Pressure 50 PSI Part No. Description 16-144-1120 1-1/2" I.D., 100'L Bulk 16-144-1126 1-1/2" I.D., 50'L R/O Ctn. Part No. Description 16-105-1000 1" I.D., 50'" 16-105-1120 1-1/2" I.D., 50'L 16-105-1124 1-1/2" I.D., 12-1/2"L Part No. 50'L Coil Part No. 12-1/2' L Part No. 6-1/4'L Part No. 24"L Part No. 48"L I.D. In & mm O.D. In 16-250-0120 16-250-0124 — — — 1/2" - 13 27/32" 16-250-0580 16-250-0584 — — — 5/8" - 16 61/64" 16-250-0340 16-250-0344 — — — 3/4" - 19 1-1/16" 16-250-0780 16-250-0784 — — — 7/8" - 22 1-3/16" 16-250-1000 16-250-1004 — — — 1" - 25 1-5/16" 16-250-1180 16-250-1184 — — — 1-1/8" - 28 1-7/16" 16-250-1140 16-250-1144 16-250-1141 — — 1-1/4" - 32 1-19/32" 16-250-1380 — — — — 1-3/8" - 35 1-23/32" 16-250-1120 16-250-1124 — — — 1-1/2" - 38 1-53/64" 16-250-1580 16-250-1584 — — — 1-5/8" - 42 2" 16-250-1340 16-250-1344 — — — 1-3/4" - 45 2-1/8" 16-250-1780 16-250-1784 — — — 1-7/8" - 48 2-19/16" 16-250-2000 16-250-2004 — — — 2" - 51 2-13/32" 16-250-2140 16-250-2144 2-1/4" - 58 2-11/16" 16-250-2380 16-250-2384 — — — 2-3/8" - 60 2-3/4" 16-250-2120 16-250-2124 — — — 2-1/2" - 63 2-7/8" 16-250-3000 16-250-3004 16-250-3001 16-250-3000-24 16-250-3000-48 3" - 76 3-7/16" 16-250-3120 — 16-250-3120-24 — 3-1/2" - 90 4" 16-250-4000 16-250-4004 — — 16-250-4000-48 4" - 102 4-5/8" (S5M) Part No. 100’ Coil Part No. 50'L R/O Ctn. I.D. In & mm Bend Rad. In & mm Vac Rating 16-146-0580 — 5/8" - 15.9 3 - 76.2 28 16-146-0340 16-146-0346 3/4" - 19.1 3 - 76.2 28 16-146-1000 — 1" - 25.4 3 - 76.2 28 16-146-1180 — 1-1/8" - 28.6 4 - 101.6 28 16-146-1140 — 1-1/4" - 31.8 3 - 76.2 28 16-146-1120 — 1-1/2" - 38.1 4 - 101.6 28 16-146-2000 — 2" - 50.8 5 - 127.0 28 16-146-2120 — 2-1/2" - 63.5 177.8 28 16-146-3000 — 3" - 76.2 9 - 228.6 28 Part No. 100' Coil Part No. 50'L R/O Ctn. I.D. In & mm Bend Rad. In & mm Vac Rating — 16-148-0586W 5/8" - 15.9 3 - 76.2 28 16-148-0340W 16-148-0346W 3/4" - 19.1 3 - 76.2 28 — 16-148-1006W 1" - 25.4 3 - 76.2 28 16-148-1180W 16-148-1186W 1-1/8" - 28.6 4 - 101.6 28 16-148-1120W 16-148-1126W 1-1/2" - 38.1 5 - 127.0 28 Hoses/Sanitation 0O7O5 & '5I9E 8NI7
RkJQdWJsaXNoZXIy MTAyMzU3Ng==