Shop 24/7 at www.seawide.com 263 Fittings/Fuel Tanks/Plugs • MOTOR & DRIVE UNIT Snaps on-quickly ushes salt or sand from outboard. Slide valve stays on engine and is O-Ring sealed. Kit includes: slide valve, quickconnect, and rubber washer. Quick Flush® Part No. Description QF-1K-DP Johnson/Evinrude° QF-2K-DP Mercury/Yamaha/Other (T9T) Dual action vacuum pump works with both the upstroke and downstroke to get the job done right in less time! Extracts warm or cold oil with no electric or air power required. Automatic shut-off oat eliminates over ow. No-mess— features tethered cap and easy-pour spout. Bucket style handle makes it easy to transport and pour used oil. Manual pressure relief valve delivers gulp-free, mess-free performance. Fluid Extractors Part No. Description 035340 7L, 7.2 Qt. (MOE) Flanged 90° on one end to function as a drain for transom, moterwell, livewell or baitwell. For use with Moeller’s SnapTite®, Turn-Tite® and TRail-n-Bail® plugs. Installation requires drain ttings kit 20848-001 and anging tool. DT Brass (MOE) Part No. Length Description 021253-300D 3” (76 mm) 1-1/4” OD Drain Tube 021253-388D 3-7/8” (98 mm) 1-1/4” OD Drain Tube 021003-600D 6” (152 mm) 1” OD Drain Tube 021003-1400D 14” (356 mm) 1” OD Drain Tube 021003-1500D* 15” (381 mm) 1” OD Drain Tube Dt Aluminum Part No. Alum Length Description 021002-188D 1-7/8” (48 MM) 1” OD Drain Tube 021002-225D 2-1/4” (57 mm) 1” OD Drain Tube 021002-300D 3” (76 mm) 1” OD Drain Tube * Fits the Boston Whaler Montauk Transom Drain Plug Boat drain plug of 1/2”brass. Limited 1 year warranty. Part No. Description 020307-10 Brass (MOE) Snap-Tite Bailer Plugs Part No. Description 053056-10 1” Brass 029000-10 1” Brass, Packaged 029070-10 1” Alumimum, Packaged (MOE) Brass plug with snap-down seal rubber plug is 1” diameter. Corrosion resistant, snaps in drain tube for secure t. Limited 1 year warranty. Turn-Tite Bailer Plugs Part No. Description 053061-10 1” Brass, Turn-Tite 020883 1-1/4” Brass, Turn-Tite, Bulk (MOE) Brass plug with twist-turn seal rubber plug is 1” diameter. Corrosion resistant. Limited 1 year warranty. Fuel Tanks Part No. Description 8803LP2 3 Gal., 16.6”L x 11.45”W x 7.3”H w/o Gauge 8803LPG2 3 Gal., 16.6”L x 11.45”W x 7.3”H w/Gauge 8806LP2 6 Gal., 19.82”L x 13.5”W x 9.16”D w/o Gauge 8806LPG2 6 Gal., 19.82”L x 13.5”W x 9.16”D w/Gauge 8806LPG2S 6 Gal., 19.82”L x 13.5”W x 9.16”D w/o Gauge Sgl. Pack 8812LLPG2 Low Pro le, 12 Gal., 24”L x 18”W x 11.61”H, w/o Gauge 8812LPG2 12 Gal., 22.75”L x 14.25”W x 14.47”H w/Gauge EPA Certi ed multi-layer tank with industry leading fuel ow performance. Designed around the EPA and California Air Resources Board (CARB) regulations. Features an ergonomic design, an optional gauge and a tethered self sealing cap with audible click. Automatic Vacuum Valve ensures proper fuel ow and eliminates the need for manual vent and operator adjustment. Low-permeation tank virtually eliminates fuel evaporation and fuel loss. Compatible with 1/4” NPT fuel ttings. Ethanol and alcohol compatible. EPA and CARB Certi ed. (A7J) 8803lp2 8806lpg2 8812LLP2 (A7J) Attwood fuel tank ttings and hose ttings are suitable for use with leaded, unleaded, ethanol blended and alcohol- blended fuels. Unless otherwise speci ed, threaded ttings have 1/4” male NPT threads; barbed ttings t 3/8” I.D. hose. Clamps are not included. Use thread sealant on all threads. Fuel Tanks & Hose Fittings 8889LP6 8899LP6 (A7J) Universal Sprayless Connectors Part No. Description 8838US6 Male & Female w/Thread Sealant 8838HM6 Hose Male, 5/16” x 3/8” 8838TM6 Tank Male, 1/4” NPR w/ Thread Sealant Eliminates the spraying of fuel when connecting and disconnecting pressurized fuel hoses during fueling or maintenance. Replaces traditional tank ttings and eliminates spray when connecting or disconnecting fuel ttings. The high strength body is engineered to withstand the harsh marine environment. Includes female and male hose ttings compatible with 3/8” and 5/16” fuel lines. Male tank tting has pre-applied fuel-grade thread sealant to prevent fuel leaks and ts all standard 1/4” NPT ttings. Fittings have check valves that automatically close upon disconnecting. Compatible with Ethanol blended fuels and all OEM brand engines. (MOE) Part No. Fitting Description Material Mates To Application 8873-6 1/4” NPT Thread Tank Male Brass 8890LP6 Mercury Tank Fitting 8883-6 1/4” NPT Thread Hose Female Acetal 8889LP6, 88FHEW16 Johnson/Evinrude/ OMC 8887-6 1/4” NPT x 1/4” NPTF 90° Elbow Brass Universal 8889LP6 3/8” Barb Hose Female Acetal 8883-6 Tank to Engine End 8890LP6 3/8” Barb Hose Female Acetal 8873-6 Mercury Tank Fitting 8896LP6 3/8” Barb Hose Female Acetal Mercury Engine End 8897-6 1/4” NPT Thread Tank Male Brass 8896LP6, 88FHY516-6 Yamaha Fuel Line Kit 8899LP6 - Mercury Tank Fitting 8900-6 3/8” Barb Hose Female Acetal Honda Engine End 8901-6 1/4” NPT Thread Tank Male Chrome Plated Brass 8902-6 90HP+ (Large Bore)
RkJQdWJsaXNoZXIy MTAyMzU3Ng==