Shop 24/7 at www.seawide.com 225 Fresh Water • FRESH WATER & SANITATION Push-In Plug For Drains Part No. Description PP-118-DP For 1-1/8" Thru Hull & All Purpose Drains, Black PP-150-DP For 1-1/2” Thru Hull Drains, Black (T9T) Used to stop water ow through drains or over ows from baitwell or livewell. Also work well as plugs for sink drains and built in cooler drains. Measures 5-1/4”O.D. with 3/3-4” cut out. Louvered Vent Covers Part No. Description LV-1-DP Black LV-1FW-DP White (T9T) Screw-in plug stays attached. Made of tough nylon material with an O-ring seal. Flange is 1-1/2” x 2” and ts a 1” hole. Drain Plugs Part No. Description DP-1-DP Black DP-2-DP White (T9T) Fits hulls up to 3-1/2” thick. Fits 1-1/2” to 2” hoses. Chrome plated tting for use above the waterline. Scupper Thru Hull Fitting Part No. Description RFTH-2B-DP White,Blk. Flapper, 1-1/2” or 2” RFTH-2BCP-DP Chrome Plated, 1-1/2” or 2” (T9T) Designed with a ange molded into part to t into hole so that cut or raw edges are hidden by oor drain for a more ef cient, attractive installation. Works on berglass or carpeted surfaces and is great for deck drainage. Floor Drain and Vent Part No. Description FD-2-DP 4-1/4" Overall, 2 -1/2" Dia. Hole, Black FD-4-DP 5-5/8” Overall,4” Dia. Hole, Black (T9T) Part No. Description ODT-1-DP Push-in Straight, 12”L ODT-190-DP Push-In 90°, 12”L ODTS-1-DP Small Screen For ODT-1 & ODT-190 ODT-2-DP Push-In Straight, 18”L w/Unglued Screen ODT-290-DP Push-In 90° Large ODTS-2-DP Screen For Large Over ow Drain Tube ODT-1-12GSTW-DP Screw-In 12”L w/Threaded Boot & Glued Screen Performs as a functional and economical over ow drain tube. Made of all marine grade PVC construction for long life. OYerfloZ 'rain 7ubes (T9T) Part No. Description AS-1-DP 3/4”-14 Threaded w/Lg. Mesh, Black Base AS-2-DP 1”-8 Threaded w/Lg. Mesh, Gray Base All Purpose Drain Part No. Description APD-190-DP 90°, Black APD-1-DP Flush Head, Black (T9T) All purpose 3/4” drain is straight with concave head. Screw-on stainless steel wire mesh strainers are designed to provide effective, dependable protection against trash or sh scales which could clog drains in bait wells or pump impellers in aeration systems. Made from formed stainless steel wire mesh cloth and then molded into a PVC base with internal threads this unit is non-corrosive. -1: Used on any aerator pump intake. Simply screws onto threaded pump intake in livewell or on exterior of boat. Thread: 3/4”-14. -2: Used as a strainer on livewell drains. Screws onto thru-hull tting. Fits T-H Marine thru-hulls (TH-1, TH-1XL, TH90 and TH-92). Thread: 1”-8. (T9T) Aerator Screen Strainer Stainless Mesh
RkJQdWJsaXNoZXIy MTAyMzU3Ng==