Your Local, Nationwide Distributor 154 ELECTRICAL & LIGHTING • Electrical Components Part No. Description 5060-BSS AGC Crimpable 5061-BSS Waterproof 5063-BSS Heavy-duty Part No. Description 5064-BSS In-line 5065-BSS In-line, Waterproof Part No. 5021-BSS Part No. 5006100-BSS Part No. 5032-BSS Part No. 5035-BSS Part No. Description 5025-BSS 6 circuit, Neg & Positive Bus 5026-BSS 12 circuit, Neg & Positive Bus 5028-BSS 6 circuit, Positive Bus Water-Resistant Fuse Holder Panel Mount • Rated IP66 on front – protected against powerful water jets • 20A Max. fuse amperage • 0.50" (12.70 mm) mounting hole In-Line Fuse Holders • Accepts 12-16 AWG (Crimpable only) or 12-18 AWG wire (Waterproof, Heavy-duty) • 30A Max. fuse amperage 5060-BSS ATO® or ATC® In-Line Fuse Holders • Supplied with 12 AWG pigtails • 30A Max. fuse amperage 5064-BSS MAXI Fuse Block • Snap-on terminal cover insulates all conductive parts, satisfying ABYC/USCG requirements • Cover breakouts allow wires from sides or bottom • Terminal screws compress fuse blades within blocks for low resistance connections • Ignition Protected - for use in gasoline engine compartments • Label recess accepts large format label • Fuses sold separately ST-Blade Fuse Blocks Independent source fuse block. • Consolidates branch circuits and eliminates in-line fuses • Can be used for 24-hour circuits and switched circuits in same block • Screw terminals for securing wires accept ring terminals • Clear insulating cover with label recesses and storage for one fuse, satis es ABYC/USCG insulation requirements • Easy to open, push button latch for easy access to fuses • Tin-plated copper buses and fuse clips • Fuse Block with cover includes 20 write-on circuit labels and two Terminal Block Jumpers • Fuses sold separately ST-Blade Split Bus Fuse Block Common and/or independent source fuse block. • Provides two isolated groups of six ATO/ ATC circuits • For use with either two isolated batteries or with a single battery providing a mix of 24-hour and switched circuits • Clear insulating cover satis es ABYC/USCG insulation requirements and provides storage for two spare fuses • Accepts ring terminals • Easy to open, push button latch provides easy access to fuses • Tin-plated copper buses and fuse clips • Includes 20 write-on circuit labels • Fuses sold separately ST-Blade Common Source Fuse Blocks Consolidates branch circuits and in-line fuses. • Screw terminals for securing wires accept ring terminals • One-piece stainless ange nuts ensure safe and secure connections • Clear insulating cover with label recesses and storage for two fuses, satis es ABYC/USCG insulation requirements • Easy to open, push button latch for easy access to fuses • Tin-plated copper buses and fuse clips • Fuse blocks with covers include 20 write-on circuit labels • #10-32 Stud • Fuses sold separately 5025-BSS (B6Z) 5061-BSS 5063-BSS 5065-BSS Part No. 5005-BSS ANL Fuseblock 35 ANL Fuse Block with insulating cover — 35 to 300A. Accepts 5/16” (M8) ring terminals. For use on systems up to 32 Volts DC. Swing out design allows replacement of the fuse without removing fasteners. Stainless steel studs provide resistance to corrosion and high torqueing for excellent electrical contact. UL 94-V0 base resists high heat. Insert molded studs ensure secure fuse mounting. Insulating cover satis es ABYC/USCG requirements. Cover breakouts allow wire access in any direction. Fuse sold separately.
RkJQdWJsaXNoZXIy MTAyMzU3Ng==