Shop 24/7 at www.seawide.com 153 Cords/Adapters • ELECTRICAL & LIGHTING 12/24V Dual USB Chargers • Conformal coated circuit board for the harsh marine environment • Protective dust cap keeps debris and moisture out • Mounts in a common 1-1/8" hole 1016-BSS: • Compatible with popular mobile devices • Internal fusing 1045-BSS: • Charges at the speed required by speci c devices • Internal ltering for reduced electronic interference • Over temperature protection 12V Plugs • Corrosion resistant materials • Twist lock system - plug locks securely into socket • Internal strain relief and cord seal • Nickel plated copper alloy used for all current carrying components • Sealing ring to keep out spray and make it seat rmly in the socket m Series Battery Switches 300 Amps continuous rating for small gasoline or diesel engines. • Intermittent Rating: 500A DC (6006 & 6007), 450A per circuit (6011) • Cranking Rating: 900A DC (6006 & 6007), 675A per circuit (6011) • Mounting: Rear, Front, or Surface e Series Battery Switches 350 Amps continuous rating for large gasoline or diesel engines. • Continuous Rating: 350A DC • Intermittent Rating: 600A DC • Cranking Rating: 1200A DC • Mounting: Rear or Front SI-ACR Automatic Charging Relay Automatically combines batteries during charging, isolates batteries when discharging and when starting engines. 1045-BSS 1016-BSS AGC Fuse Kit 41-Piece Includes 40 AGC fuses and a Heavy Duty In-Line Fuse Holder. Four each 1A, 2A, 3A, 5A, 7.5A, 10A,15A, 20A, 25A, 30A ATO® or ATC® Fuses • Fast-acting blade fuse • Color-coded for easy identi cation • Visible indication of blown condition • Tin-plated connector blades for corrosion resistance ATM Fuse Kit Includes 5 ATM fuses (5A, 10A, 15A, 20A, 30A) easyID™ ATC® Fuses • Fast-acting easyID™ illuminated blade fuses use • Light Emitting • Diode (LED) technology to show when a fuse has blown • Color-coded for easy identi cation • Visible indication of blown condition • Tin-plated connector blades for corrosion resistance ST-Blade Battery Terminal Mount Fuse Block Kit Easily add 4 fused circuits to the terminal of a battery. Provides power to new accessories in your boat or vehicle. • Mounts on the battery terminal stud • Screw terminals for securing wires • Insulating cover meets ABYC/USCG insulation requirements • Ignition Protected - for use in a gasoline engine compartment • Includes four 16-14 AWG, four 12-10 AWG Nylon insulated ring terminals and a 4-circuit negative busbar • Includes four write-on circuit labels 5298-BSS 5245-BSS (B6Z) 6006-BSS Part No. Description 6006-BSS Single Circuit, On-Off, 48V DC 6007-BSS Selector, 4 Position, 32V DC 6011-BSS Dual Circuit Plus™, 32V DC Part No. Description 1016-BSS 2.1A 1045-BSS 4.8A Part No. Description 9001e-BSS Selector, 4 Position, 32V DC 9003e-BSS Single Circuit, ON-OFF, 48V DC Part No. Description 5286-BSS 5 pack Part No. Description 5291-BSS 3A, 2 pack 5292-BSS 5A, 2 pack 5294-BSS 10A, 2 pack 5295-BSS 15A, 2 pack 5298-BSS 30A, 2 pack 5290-BSS Kit (3x 3A, 3x 5A, 3x 7.5A, 3x 10A, 6x 15A, 3x 20A, 3x 25A, 3x 30A, 3x 40A) Part No. Description 5239-BSS 5A, 2 pack 5241-BSS 10A, 2 pack 5242-BSS 15A, 2 pack 5243-BSS 20A, 2 pack 5245-BSS 30A, 2 pack 5246-BSS 40A, 2 pack 5287-BSS Kit, 5A, 10A, 15A, 20A, 25A, 30A, 6 pack 9003e-BSS Part No. 7610-BSS Part No. 5289-BSS Part No. 5024-BSS Part No. 1011-BSS Plug features moisture proof sealing ring around the shaft to keep out spray and make it sit rmly in the outlet; “ON” indicating LED; internal strain relief and cord seal; and built-in 10 Amp fuse. Designed to withstand the rigors of wet environments and constant vibration with large contact surfaces for good electrical connection. Twist lock system—plug locks securely into socket. Nickel plated copper alloy used for all current carrying components. Front panel, rear panel, or surface mount. Part No. 1010BSS 12V DC Plug SEE OUR WEBSITE FOR A COMPLETE SELECTION OF FUSES.
RkJQdWJsaXNoZXIy MTAyMzU3Ng==