25 BALL MOUNTS TOWING 1Not to be used in rise position. BALL MOUNTS Ball mounts vary by weight rating, shaft length, and rise/drop measurements. Husky’s Class II, III & IV ball mounts are manufactured with a precise rise or drop to suit each application. Weight rating is limited to vehicle tow rating; see vehicle owner’s manual. Retail packaged, unless indicated by a *(bulk). Limited lifetime warranty. FOR BALL MOUNT RISE: A = Distance from ground to bottom of trailer coupler. B = Distance from ground to top I.D. of the receiver tube opening. C = Amount of rise necessary to keep trailer level. FOR BALL MOUNT DROP: A = Distance from ground to bottom of trailer coupler. B = Distance from ground to top I.D. of the receiver tube opening. C = Amount of drop necessary to keep trailer level. A: Measure from the ground to the top of the hitch. B: Measure from the ground to the INSIDE top of the trailer coupler (when level) C: Determine the “DROP” or “Rise” DROP: if the coupler is LOWER than the hitch: ADD the height of the hitch ball (usually 3”) RISE: if the coupler is HIGHER than the hitch: SUBTRACT: the height of the hitch ball (usually 3”) EXAMPLE: a 7” DROP is needed to make this trailer level. 4” (Hitch - Coupler) + 3” (Hitch Ball Ht.) = 7” (DROP) 21” 17” 4” 31357 31358 1-7/8” 2,000 lb Gross Towing Weight 2” 6,000 lb Gross Towing Weight 2-5/16” 10,000 lb Gross Towing Weight Standard Features: • Powder Coated Finish • Indexing Pin Design • Grease Fitting • Class IV Tested • Patented 3-Ball Swivel System • Limited Lifetime Warranty Patented One quick switch. One tough hitch. No fumbling between setups. The Switch Hitch by Husky® has a solid core with a swivel design making it faster to switch over than any other tri-ball trailer hitch. 33140 Switch Hitch PULL SWITCH LOCK SWITCH HITCH 31364 31342 PART# BALL THREAD DIAMETER LENGTH RISE DROP GTW CLASS II, 1-1/4" 31341 3/4” 6-5/8” 5/8” 1-1/4” 3,500 lb 31342 3/4” 7-7/8” 2-1/4” 2-7/8” 3,500 lb CLASS II / III / IV, 2" 31357 1” 8” 3/4” 2” 6,000 lb 31359 1” 6-3/4” 2” 3-1/4” 6,000 lb 31360 1” 9” 1” 2-1/4” 6,000 lb 31358 1” 10” 3” 4-1/4” 5,000 lb 31361* 1” 9” 1 8” 3,500 lb 31362 1” 10-1/2” 1” 2-1/4” 6,000 lb 31363 1” 11-1/2” 4-3/4” 6” 5,000 lb 31369 1” 12” 1” 2-1/4” 6,000 lb CLASS V, 2.5" 33004 1-1/4” 9-1/2” 1” 2-1/2” 12,000 lb 33005 1-1/4” 9-1/2” 3-1/4” 4-3/4” 12,000 lb STRAIGHT ECONOMY 31364 1” 8” 3/4” 2” 6,000 lb
RkJQdWJsaXNoZXIy ODUxNTM3