2021 NTP-STAG Marine Catalog

ELECTRICAL & LIGHTING Order Online: www.viantp.com • www.eKeystone.com 59 Part No. Description 150BBI 15A, Black 150BBIW 15A, White Part No. Description 12VPK Receptacle & Plug 12VPG Plug 12VRC Receptacle Part No. Description 12VCP Receptacle & Plug 12VBR Receptacle 12VBP Plug 2VBRAD Adapter Part No. Description 12VCPS2 Receptacle & Plug 12VBRS2 Receptacle 12VBPS2 Plug Part No. Description 12VCPS3 Receptacle & Plug 12VBRS3 Receptacle 12VBPS3 Plug Part No. Description 12VCOMBORV Combination 12V/USB Receptacle 12DUSBRV Dual USB Receptacle Hard Wired Charger Inlets Charger inlets make battery charging through an on-board battery charger safer and more convenient. Inlets mount on the boat exterior and are hard-wired directly to the charger. To use, just open the flip lid cover and plug an extension cord into the inlet. • Mounts easily to fiberglass and aluminum hulls • Perma-Lock terminals and color coded wire entrance holes make wiring a snap • UV resistant housing/cap 12V Receptacle & Plugs Interconnecting 12V system securely locks the plug into the receptacle, resulting in a positive, moistureproof connection. Corrosion resistant, optimized metal connection points for maximum conductivity. 70A Trolling Motor Plug & Receptacle • 70A continuous rating • Universal design for 2 or 3-wire configuration 12V, 24V, 12/24V, 24/36V, 36V or 48V systems • Floating pin design for maximum connectivity and durability • Corrosion resistant, plated brass electrical components • Receptacle contains watertight sealing cap • Plug contains Integrated strain relief and keyed design with thumbprint locator • Accepts 8 and 6 AWG wire 2-Wire ConnectPro Charging/Trolling System Receptacles: • Works with 12V, 24V, or 36V 2-wire systems • For front mount panel installations • Weather resistant sealing cap • Drain holes in receptacle keep water away from electrical components • Perma-Lock™ screw terminals will not loosen under extreme hull vibration • Fits standard 1-1/8" diameter mounting hole • Accepts up to 10 AWG wire Plug: • O-ring seal for waterproof connections • Weather resistant plug cover • Corrosion resistant, plated brass electrical components • Accepts 16 to 8 AWG wire • Ergonomic contoured grip for easy hook-up and ground blade alignment • Max rating is 40 amps 3-Wire ConnectPro ® Charging/Trolling System • Corrosion resistant, plated brass electrical components • Max rating is 40 amps Receptacles: • Universal design for 2 or 3-wire configuration 12V, 24V, 12/24V, 24/36V or 36V systems • Watertight sealing cap • Drain holes in receptacle keep water away from electrical components • Perma-Lock™ screw terminals will not loosen under extreme hull vibration • Standard 1-1/8" diameter mounting hole • Accepts 10 and 8 AWG wire Plug: • O-ring seal for waterproof connections • Weather resistant plug cover • Accepts 16 to 8 AWG wire • Ergonomic contoured grip for easy hook-up and ground blade alignment Adapter: • Allows 6 AWG wire connection to ConnectPro receptacle 12VRC 12VPG 12VBR 12VBRAD 12VBP 12VBRS2 12VBPS2 Deluxe Dual USB Chargers and 12V Receptacle Water-resistant covers protect against dust and water. Dual USB: • 12V DC input • 5V, 2.1A total output • LED to indicate there is power to the USB Receptacles: • 12V DC input • 12V DC output, rated up to 20A 4-Wire Trolling-Charging System Packag • Includes Charger Plug (Male), Trolling Motor Plug (Male) and Receptacle The 4-wire trolling/charging system eliminates the need for a charge/run switch. Install the receptacle on the boat, mount the black trolling motor plug on the trolling motor, and the red charger plug on the leads of the battery charger. Simply plug in the black plug to troll, or plug in the red plug to charge. 12VCOMBO 12VDUSB 150BBI (M1D) Part No. 2018PKG