LINK-Towing-Catalog-2019

[ 60 ] See Manufacturer’s Catalog For More Applications. Specifications are subject to change without notice. (C2X) Suspension Systems Tires & Wheels Hitches Jacks, Couplers & Winches Electrical & Lighting Trailering Components Chemicals & Coatings Brake Controls & Actuators Axles & Components Brake Assemblies Index Towing Cargo & Outdoor Gear Fenders Trailer Fenders from Tandem Square Back with Valance Steel Fender PART # SIZE (C2X) - C2XF0012 9" x 20.5" x 72" (C2X) - C2XF0010 10.75" x 20.5" x 72" (C2X) - C2XF0011 9" x 19.75" x 66" This fender is constructed of a 16 gauge cold roll steel. It is the same width at the top and bottom. The front radius is one inch and the back is formed at 90 degrees downward. The teardrop valance measures 7-5/8” tall from the top of the fender to the bottom of the valance. This fender is designed to accommodate a tandem axle trailer and is provided without additional light mounting holes or brackets. Tandem Square Back without Valance Steel Fender PART # SIZE (C2X) - C2XF0009 9" x 20.5" x 72" This fender is constructed of a 16 gauge cold roll steel. It is the same width at the top and bottom. The front radius is one inch and the back is formed a 90 degrees downward. No Valance is provided in this fender design. This fender is designed to accommodate a tandem axle trailer. There are no additional light mounting holes or brackets. Single Double Radius Fender PART # SIZE (C2X) - C2XF0005 7" x 10" x 28" This fender is constructed of a 16 gauge cold roll steel and incorporates a 1 inch radius on the front and the back of the fender. This fender is designed to accommodate one wheel of any given axle. Single Square Back Steel Fender PART # SIZE (C2X) - C2XF0007 7.75" x 10" x 28" (C2X) - C2XF0008 9" x 15" x 32" (C2X) - C2XF0006 10.75" x 20" x 36" This fender is constructed of a 16 gauge cold roll steel and incorporates a 1 inch radius on the front and a 90 degree bend on the back of the fender. Single Jeep ® Steel Fender PART # SIZE (C2X) - C2XF0004 8" x 8" x 24" (C2X) - C2XF0003 10" x 19.25" x 36" Jeep style fenders are flat on top and have two equal flat legs on each side. This fender configuration incorporates a 1 inch radius on both sides and are made of 16 gauge cold roll steel. Single Steel Fender Back PART # SIZE (C2X) - C2XF0001 10.50” x 14” x 29” (C2X) - C2XF0002 15” x 25” x 72” Round Fender backs are made of 18 gauge steel and are designed to cover the inside back of a fender. 1 YEAR WARRANTY PART # SIZE Two Wheel Straight – Bright Tread - Aluminum (C2X) - C2XMFR326 9” x 14” x 68” (C2X) - C2XMFR328 10” x 12-1/2” x 68” (C2X) - C2XMFS107 9” x 20-1/4” x 72” Measurements in: Width x Height x Length